Type any number of minutes and get the answer three ways at once: decimal hours for payroll, hours and minutes for everyday use, and days if the total runs past 24 hours.
Runs in your browser. Nothing you type is sent anywhere.
This minutes to hours converter divides your minutes by 60 and shows the result as decimal hours, as hours and minutes, and in seconds and days. Decimal hours are what most payroll and timesheet systems expect, while hours and minutes are easier to read.
How Do You Convert Minutes to Hours?
To convert minutes to hours, divide the minutes by 60. For example, 135 minutes divided by 60 equals 2.25 hours. The whole number is the hours, and the decimal part times 60 gives the leftover minutes, so 0.25 hours is 15 minutes, making 2 hours 15 minutes.
What Is the Formula for Minutes to Hours?
The formula is hours = minutes ÷ 60, because one hour has exactly 60 minutes under the International System of Units definition of time.
leftover minutes = minutes − (whole hours × 60)
A decimal hour is a fraction of an hour written as a decimal, so 0.5 is 30 minutes and 0.1 is 6 minutes. Writing time as hours and minutes (hh:mm) keeps the sexagesimal, base 60, style we use on clocks.
Minutes to Hours Conversion Table
Common values used on timesheets and in payroll rounding:
| Minutes | Decimal hours | Hours:minutes |
|---|---|---|
| 6 | 0.1 | 0:06 |
| 15 | 0.25 | 0:15 |
| 20 | 0.33 | 0:20 |
| 30 | 0.5 | 0:30 |
| 45 | 0.75 | 0:45 |
| 50 | 0.83 | 0:50 |
| 90 | 1.5 | 1:30 |
| 120 | 2 | 2:00 |
| 480 | 8 | 8:00 |
| 1,440 | 24 | 24:00 |
Why Do Timesheets Use Decimal Hours?
Timesheets use decimal hours because pay is calculated by multiplying hours by an hourly rate, and a calculator cannot multiply 7:45 directly. Converting 7 hours 45 minutes to 7.75 hours lets payroll software work out wages in one step. The US Department of Labor allows employers to round time to the nearest quarter hour, as long as rounding is neutral over time. To total a full week of shifts, use our time card calculator, and to turn the hours into pay, try the hourly to salary calculator.
What Is the Difference Between 1.5 Hours and 1 Hour 50 Minutes?
1.5 hours means one and a half hours, which is 1 hour 30 minutes, not 1 hour 50 minutes. This is the most common mix up when reading decimal time. If you need the gap between two clock times instead, the hours calculator works it out from start and end times.
Worked Example
A freelancer logs 135 minutes on a task and bills at $40 an hour. Enter 135 in the tool: it shows 2.25 hours, or 2 hours 15 minutes. The invoice line is 2.25 × $40 = $90. Typing 1,500 minutes instead gives 25 hours, shown as 25:00 and 1.042 days.
How Do You Use the Minutes to Hours Converter?
Enter the minutes
Type the total minutes into the Minutes box. Decimals such as 92.5 work too.
Pick decimal places
Choose 2 for payroll, or 3 or 4 when you need more precision.
Read decimal hours
The big number is the time in decimal hours, ready for timesheets and invoices.
Check hh:mm, seconds and days
The boxes below show the same time as hours and minutes, seconds and days.
Frequently Asked Questions
How many hours is 90 minutes?
90 minutes is 1.5 hours, or 1 hour 30 minutes. Divide 90 by 60 to get 1.5. The whole number 1 is the hours and 0.5 of an hour is 30 minutes.
How do you write 45 minutes as a decimal hour?
45 minutes is 0.75 hours. Divide 45 by 60 to get 0.75. On a timesheet you would write 0.75 for a 45 minute task, or 8.75 for a shift of 8 hours 45 minutes.
Is 1.30 hours the same as 1 hour 30 minutes?
No. 1.30 decimal hours is 1 hour 18 minutes, because 0.30 times 60 is 18. One hour 30 minutes is written as 1.5 decimal hours or 1:30 in clock style.
How many hours is 1,000 minutes?
1,000 minutes is about 16.67 hours, or 16 hours 40 minutes. Divide 1,000 by 60 to get 16.666, then multiply the 0.666 part by 60 to get the 40 leftover minutes.
How do I convert hours back to minutes?
Multiply the hours by 60. For example, 2.25 hours times 60 equals 135 minutes. For hours and minutes, multiply the hours by 60 and then add the leftover minutes.
Does this converter round the result?
It shows 2 decimal places by default, which is standard for payroll. Pick 3 or 4 decimal places for more precision. The hours and minutes view keeps the leftover minutes exact.
Sources and Further Reading
- NIST: SI base unit of time, the second
- US Department of Labor: rounding of hours worked, 29 CFR 785.48
Related Tools
Last reviewed: October 2026